Alfa Laval Pumps > Series S Rotary Lobe Pump
SSP Series S stainless steel rotary lobe pumps operate at the heart of process industries worldwide. Series S pumps fulfill a wide range of application requirements throughout Chemical, Pharmaceutical and other related industries. Handling from low to high viscosity pumped media, the characteristic smooth, low shear pumping action is ideal for delicate media and where organic solids in suspension, creams, froths, gels, emulsions and mixtures are to be pumped.
Operation
The positive displacement of the Series S pump is provided by noncontacting, contra rotating tri-lobe or bi-lobe rotors within a fully swept pump chamber. The Series S pump can be configured with vertical or horizontal ports. All Series S pumps are capable of bi-rotational flow without modification. Series S pumps are suitable for CIP (Cleaning In Place) and conform to USA 3A Sanitary Standard.
User Benefits
- High efficiency
- Low energy consumption
- Compact size
- Robust construction
- Smooth flow
- Reversible operation
- Low shear pumping
- Minimal pumped media agitation
- Hygenic design
- Easy maintenance
The Series S pump with its modular design giving a choice of 44 models, provides for greater application flexibility and cost effective easy maintenance.
Pumphead
All metallic pumped media wetted components are manufactured in 316L type stainless steel. The Series S in standard specification has tri-lobe rotors available in three temperature ratings, allowing the pump to be operated at maximum temperatures of 70°C, 130°C and 200°C for both process and CIP.
Shafts
316L Stainless steel shafts are used for pressures up to 145 psi. Higher pressures up to 290 psi are attained by the use of high strength duplex stainless steel.
Gearbox
The Series S pump has a robust cast iron gearbox with a universal design for models S1 to S4. This gives the flexibility of mounting pumps with the inlet and outlet ports in either a vertical or horizontal plane by changing the foot and its position. The Series S models S5 and S6 have a choice of two dedicated gearbox castings, which allows the inlet and outlet ports to be in either the vertical or horizontal plane.
The Series S pump range has twelve pump head displacements ranging
from 1.4 gallons/100 revs to 93.26 gallons/100 revs.
- Flow rates up to 466 gpm
- Differential pressures up to 290 psi
- Port sizes from 1” to 6” diameter
High Volumetric Efficiency
The Series S pump offers high efficiency transfer of low, medium and high viscosity pumped media. This important aspect of performance is achieved by maintaining high accuracy and repeatability of component part manufacture, thereby maximizing shaft rigidity and minimizing the effects of thermal expansion within the pump gearbox. This combination allows the optimum pump head geometry to be achieved which, in turn, maximizes volumetric efficiency.
Low NPSH
The Series S pump with standard port connections has full through-bore inlet and outlet ports to International Standards. This reduces inlet and outlet port losses, thereby lowering NPSH requirements.
Pump Overload Protection
For essential overload protection to protect pump, drive unit and also limit pressure build up within associated process equipment.
Pressure relief valve - supplied as an integral part of the pump and not requiring any external pipework. The design is such that the valve mechanism is isolated from the pumped media. Mechanical or pneumatic operation is available for both pressure/safety and cleaning bypass.
Pump Protection Unit (PPU) - supplied as an alternative to mechanical relief valves. Incorporating micro-controller technology the PPU detects and reacts to changes in load conditions.
Surface Finish & Coatings
To enhance standard surface finish or for hygiene purposes, the pumphead and rotors may be electro polished. For abrasive applications the stainless steel pumphead and rotors may be supplied with a tungsten carbide coating or other surface hardening treatment to increase wear resistance.
Interchangeable Rotors
Mathematically defined profile and precision manufacture ensure interchangeability of rotors with sealed involute splines giving accurate position, location and positive rotor drive. Option of bi-lobe rotors in stainless steel for handling products containing large delicate solids, or bi-lobe rotors manufactured from non-galling alloy for increased efficiencies. Elastomeric tri-lobe rotors can also be offered where the application dictates.
Pumped Media Seals
The optimum primary seal can be chosen to match the pumped media and duty conditions. Single or double mechanical seals include flushed or aseptic variants. For arduous duties hard faced seal materials such as tungsten carbide or silicon carbide can be used. Packed glands offer a simple, low cost, and easy to maintain controlled leakage sealing arrangement. Pumped media wetted elastomers are EPDM, NBR, FPM all FDA conforming or PTFE for chemical applications.
Heating & Cooling Devices
These are primarily used for heating the pumphead so as to maintain the pumped media viscosity and reduce risk of any crystallization/ solidification. They may also be used for cooling purposes when required.
Connections
Comprehensive choice covering:
- Screwed male connections to all major standards including BSP, DIN11851, IMDA/3A, ISS/IDF, NPT, Rdg, RJT, SMS, Tri-clamp and more.
- Flange connections to all major standards including ASA/ANSI150, BS4504/DIN2533, BS10E and more.
- Enlarged diameter and rectangular ports for handling very high viscosity products.
Motorized Pump Units
Pumps may be supplied fully motorized with fixed or variable speed drives including appropriate control systems if required, mounted on either mild or stainless steel baseplates. In addition to electric motor drives, hydraulic, pneumatic, diesel or gasoline powered prime movers can be fitted.









