Thermal Products, Inc.

The page covers heat exchangers, process heating, cooling, and related fluid-handling equipment, with engineered selections for industrial processes.

They use different passage and surface arrangements. Fluid properties, pressure, temperature, fouling, cleaning access, and footprint influence which design is appropriate.

Provide fluid, flow or batch volume, inlet and target temperatures, heat-up time, and available power. Include operating limits and required temperature protection.

Some processes use arrangements that support both, but the design must be evaluated for each duty. Define utility temperatures and operating sequences.

An exchanger can meet a heat-transfer target while imposing too much hydraulic resistance. Pump capacity and allowable pressure losses must be considered in the selection.

Review the consequences of leakage, material compatibility, pressure relationship, and required detection or separation. Specify these needs before choosing the exchanger arrangement.

Provide heat load, fluid properties, required temperatures, flow, and site conditions. Include peak ambient or utility temperatures and anticipated changes in production.

Fouling, low flow, warm cooling supply, air in the circuit, or increased heat load can reduce cooling. Compare current readings with design and commissioning data.

Deposits, corrosion, and contamination can reduce heat transfer and restrict flow. Use a treatment and maintenance program appropriate for the materials and process.

Sensor faults, control response, changing loads, inconsistent flow, or air pockets can contribute. Review trend data and the complete control loop before changing setpoints.

Rising pressure drop or declining heat transfer at comparable operating conditions can indicate fouling. Use model-specific cleaning procedures compatible with the construction materials.

First recalculate the heat load and examine the exchanger, pump, piping, and heat-rejection equipment. Adding pump capacity alone may not increase useful cooling.

Inspect pumps, heat-transfer surfaces, strainers, fans where fitted, sensors, and fluid condition. Follow each component's schedule and record temperatures, flow, and pressure differences.

Consider leakage location, material condition, service requirements, and repair feasibility. A changed process or persistent corrosion may justify a different design or material.

Contact Process & Power at (901) 362-5500 with your location, equipment identification, and application or service concern. The team can review selection, parts, and service options for your needs.

Include the required duty, fluid or process details, operating conditions, utilities, and installation dimensions. For existing equipment, add nameplate photos, model and serial numbers, and a description of the problem or planned change.